Beam Oceana 800 User Manual page 39

Highly featured satellite terminal that allows connection to the inmarsat gsps, isatphone link and fleetphone satellite services
Hide thumbs Also See for Oceana 800:
Table of Contents

Advertisement

Call barring
An Oceana 800 SIM card always uses an
international number format, + or 00, and
the country code, 870. Call barring prevents
the following call types from being made or
received by your Terminal:
Outgoing calls: bars all outgoing calls
International calls: bars all outgoing calls
International except to home: bars all
outgoing calls except to other Inmarsat
numbers
Incoming calls: bars all incoming calls
Incoming outside home: bars all incoming
calls except from other Inmarsat numbers
If you are using a SIM card with local country
numbering, the call barring is as described by
the menu.
The first time you set up call barring, you will
need to reset the barring password. Select Menu
> Settings > Call settings > Call barring. Select
Options and navigate to Change barring pass
code. Enter the barring pass code and select OK.
The default is 0000. Enter a new four-digit pass
code and select OK. Then enter the new pass
code again to confirm it.
You will need to enter this new pass code
whenever you change your call barring settings.
To cancel a bar, highlight that type of call in the
Call barring menu, select Options and select
Cancel. To cancel all call barring, select Options
and select Cancel all barring. To check the
status of a call bar, highlight that type of call
in the Call barring menu, select Options and
select Check status.
The barring code can be entered incorrectly an
unlimited number of times. If you have forgotten
your code, please contact your service provider.
NOTE
Fixed number dialling, Call barring and Call divert
does not prevent emergency calling. Call barring
and Call divert cannot be active at the same time.
BEAM Oceana 800 - Installation & User Manual
Diverting calls
Select Menu > Settings > Call settings >
Call divert. Call divert allows you to forward
incoming calls to your voicemail or another
phone number:
Only voice calls – diverts any voice call to
your voicemail or another number
Only data calls – diverts data calls to
another phone number
Only fax calls – diverts fax calls to
another phone number
If busy – when you are engaged on
another call, this option diverts calls either
to your voicemail or to another number
If no reply – this option allows you to select
how long your phone should ring (up to 30
seconds) before the call is diverted to your
voicemail or another number
If out of reach – when you are out of
reach of a satellite signal this option
diverts calls either to your voicemail or
to another number
If not available – diverts all 'If busy' , 'If no
reply' and 'If out of reach' calls. If you assign
a divert number for any of these calls, that
number will take precedence over the 'If
unavailable' divert number
39

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for Beam Oceana 800

Table of Contents