Table of Contents
Advertisement
Safety Information
IMPORTANT! Please read the following information carefully before
installing and using this BEAM equipment. Failing to follow instructions may
compromise the safety of the product and may result in personal injury
and/or equipment damage. Please consult your supplier if you have any
further questions.
Your RST820 is a low power radio transmitter and receiver, when ON, it receives and sends out
radio frequency (RF) signals.
The design of your RST820 system complies with international safety standards.
Refer to the appropriate section of this RST820 Installation & User Manual for additional safety
information.
Warning:
Do not open equipment. There are no user-serviceable parts inside.
If a DC power supply is to be used, its output must comply with the Safety
Extra Low Voltage (SELV) requirements of IEC60950.
All connectors must only be connected to equipment ports which comply with
the Safety Extra Low Voltage (SELV) requirements of IEC60950.
Conventions in this Manual
Warnings, cautions and notes appear throughout this manual and are represented by following
conventions:
Warning:
providing information to prevent personal injury or damage to
equipment.
Note: This symbol and associated text indicate a note providing
general operating information.
Interference: All wireless phones may get interference, which could
affect performance.
Record: Write details of your unit for easy reference when required.
Ideal for troubleshooting.
This symbol and associated text indicate a warning note
Page 6 of 31
Advertisement
Table of Contents
