Beam Oceana 800 User Manual page 55

Setting up keypad lock
The keypad lock disables the keypad and
prevents accidental dialling. When activated,
the Terminal will respond to the green and red
keys to answer or reject call.
Select Menu > Settings > Security, select
Automatic keypad lock, and then select the
duration before the keypad is locked. Deactivate
the automatic keypad lock using the same menu.
To lock the keypad, ensure the main screen is
displayed, press the centre selection key followed
by the * key within 3 seconds. The keypad locked
icon is displayed on the status bar.
To unlock the keypad, press the centre
selection key followed by the * key on
the keypad within 3 seconds.
Setting up phone lock
Phone lock protects your terminal against
unauthorised use.
Select Menu > Settings > Security and select
Phone lock. Specify the idle period, from 30
seconds to 30 minutes, after which time the
Oceana 800 will automatically lock. You will be
prompted to Enter phone lock code. To unlock
the Terminal, enter the code when prompted.
The default admin code is 123456. See "Setting
up the admin code" on page 57. The new setting
will be accepted when the code is accepted.
BEAM Oceana 800 - Installation & User Manual
Reset all settings
Select Menu > Settings > Reset settings. You
will be prompted for the Admin code in order to
make this change. See "Setting up admin code"
on page 58 for more information. Returning
to default settings will not affect your admin
or user codes, PINs, organiser entries, contacts,
messages or call logs. To return these to default
setting or to delete these entries see:
• "Setting up SIM PIN code" on page 57
"Setting up SIM PIN 2 code" on page 57
•
• "Deleting a contact" on page 49
"Deleting SIM contacts" on page 49
•
55