Status Led - Beam Oceana 800 User Manual

Status LED

The Status LED indicates the terminal registration state or any error conditions:
RED
• No signal
ILLUMINATED
• Not registered
• No SIMcard
Firmware upgrade
FLASHING
mode active
Red/Yellow - Short circuit on SAT antenna input
ALTERNATING
Red/Green - Short circuit on GPS antenna input
Red/Yellow/Green - Internal communications error
Special Modes of Operation
Firmware Upgrade Mode
• In firmware upgrade mode all LED's will flash RED.
Transceiver (USB Bridge) Mode
• In this mode all LED's will flash GREEN.
60
YELLOW GREEN
DTR present on data Unit registered and
port can place a call.
Data call in progress Call in progress
OR
Transceiver Upgrade
Mode
2
3
STATUS LED
4
1. Status LED
FEATURE BUTTONS
2. Instant Message Button
3. UP Volume Button
4. DOWN Volume Button
5. Mute Button
6. Speakerphone Button
7. Tracking Button
1
5
6
7