Beam Oceana 800 User Manual page 35

Re-dialling a number
Press the green key, select from the list of
previously dialled numbers using the navigation
keys and press the green key to start the call. Your
terminal stores 30 dialled numbers. Alternatively,
select Menu > Call log > Dialled calls, select the
person you wish to call and press the green key.
Re-dialling automatically
To switch Auto re-dial on or off, select Menu >
Settings > Call settings > Auto re-dial and make
your selection. The default setting is off.
When activated, if your call did not complete,
your terminal displays Retry? and the reason why
the connection was unsuccessful. Press Select to
automatically re-dial the number three times until
the call is answered. If you press any key or receive
a call during this time, re-dialling is interrupted. If
the re-dial is successful the terminal beeps, then
rings. Select Close if you do not want to retry.
Receiving a call
To receive a call, press the green key to accept
the call or press the red key to reject it. You will
see Call from followed by either the name of
the caller (if listed in your Phonebook or SIM
contacts), the calling number, or Withheld.
Declining a call
Press the red key. The call is disconnected and
the caller details are stored in Missed calls for
later retrieval.
Returning a call
Your terminal automatically stores the numbers
of the last 20 phone calls you have answered or
missed. To return a call, select Menu > Call log.
Select the appropriate folder, eg. Missed calls or
Received calls, highlight the contact and press
the green key.
Making a call while on another call
You can put your current call on hold and make
a second call at any time. Select the contact
by selecting Options > Contacts > Phonebook
or by dialling the full international number.
When you press the green key, your current call
will automatically be put on hold. By selecting
Swap you can switch between calls at any time.
You can end either call at any time by selecting
Options > End held call or End active call.
BEAM Oceana 800 - Installation & User Manual 35