Graphics Interface; Rj45 Lan Ports - DFI CR101-D User Manual

Graphics Interface

The display ports consist of the following:
• HDMI
• LVDS
• DVI-I port
DVI-I
HDMI
HDMI Port
The HDMI port which carries both digital audio and video signals is used to connect a LCD
monitor or digital TV that has the HDMI port.
DVI-I Port
The DVI-I port is used to connect an LCD monitor.
Connect the display device's cable connector to the DVI-I port. After you plug the cable con-
nector into the port, gently tighten the cable screws to hold the connector in place.
BIOS Setting
Configure the display device in the Chipset menu ("North Bridge Configuration" submenu) of
the BIOS. Refer to chapter 3 for more information.
Chapter 2 Hardware Installation
Chapter 2

RJ45 LAN Ports

LAN 1 LAN 2
Features
• Realtek 8111DL PCI Express Gigabit LAN controller
The LAN ports allow the system board to connect to a local area network by means of a
network hub.
BIOS Setting
Configure the onboard LAN in the Chipset menu ("South Bridge Configuration" submenu) of
the BIOS. Refer to chapter 3 for more information.
Driver Installation
Install the LAN drivers. Refer to chapter 4 for more information.
19
www.dfi .com