DFI CR101-D User Manual page 54

Fintek MyGuard
Fintek HWMonitor Manager provides information about the Temperature, Fan, Voltage, and
Others information. To access the utility, click "Fintek HWMonitor Manager" on the main menu.
1. Under the Language Support
section, select the language
you would like the installa-
tion to display and then click
Next.
2. Setup is ready to install the
driver. Click Next.
3. Click "Install" to begin the
installation.
Chapter 4 Supported Software
Chapter 4
4. After completing installation,
click Finish.
To run the Fintek Hardware Monitor utility, click the Start button and then select
FitHwMonitor > FintekLPCHWMonitorManager > Fintek_LPC_HW_MonitorManager.
54
www.dfi .com