Table of Contents
Advertisement
USB transfer time-out
The time-out value for Bulk and Interrupt transfers.
Device reset time-out
Selects the USB mass storage device start unit command timeout.
Device power-up delay
Maximum time the device will take before it properly reports itself to the Host Controller.
"Auto" uses default value: for a Root port it is 100 ms, for a Hub port the delay is taken from
Hub descriptor.
Chapter 3 BIOS Setup
Chapter 3
PCH-FW Configuration
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
ME FW Version
ME Firmware Mode
ME Firmware Type
ME Firmware SKU
Firmware Update Confi guration
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
34
MEBx Type
8.0.2.1410
Normal Mode
Full Sku Firmware
1.5MB
Select Screen
Select Item
Enter: Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
ESC: Exit
www.dfi .com
Advertisement
Table of Contents
