Agilent Technologies 4000 X-Series User Manual page 171

3 Press the Sources softkey.
4 In the Edge then edge Sources Menu:
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
a Press the Arm A softkey, and turn the Entry knob to select the
channel on which the arming edge will occur.
b Press the Slope A softkey to specify which edge of the Arm A signal
will arm the oscilloscope.
c Press the Trigger B softkey, and turn the Entry knob to select the
channel on which the trigger edge will occur.
d Press the Slope B softkey to specify which edge of the Trigger B
signal will trigger the oscilloscope.
10
Triggers
171