Agilent Technologies 4000 X-Series User Manual page 298

17
Waveform Generator
To specify the voltage values of points:
1 Press Point #; then, use the Entry knob to select the point whose voltage
2 Press Voltage; then, use the Entry knob to set the point's voltage value.
To insert a point:
1 Press Point #; then, use the Entry knob to select the point after which
2 Press Insert Point.
To remove a point:
1 Press Point #; then, use the Entry knob to select the point you want to
2 Press Remove Point.
298
value you wish to set.
the new point will be inserted.
All points are adjusted to maintain uniform time spacing between
points.
remove.
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide