Eiki LC-XDP3500 Owner's Manual page 18

Setting Up
How To Connect
Laptop or desktop computer
Connect the audio cable if necessary
1. Please connect the audio cable to the AUDIO IN 1 if the computer cable is
connected to the projector's RGB IN.
2. Please connect the audio cable to the AUDIO IN 2 if the computer cable is
connected to the projector's DVI-I IN.
3. Please connect the audio cable to the AUDIO IN 3 if the video cables are
connected to the VEDIO/S-VIDEO/Y,Pb,Pr port of the projector.
Connect USB Mouse
1. Before operating the wireless mouse, connect your computer and projector with
supplied USB cable.
2. When a USB cable is connected to the computer and the projector, turn on the
projector first, then the computer. If you turn on the computer first, the wireless
mouse function may not operate properly.
3. When the projector and computer are turned on, the appropriate drivers should
load automatically.
If the selected video image is not displayed after the projector is turned on
and the correct video source has been selected, please check whether the
video source device is turned on and operating correctly. Also check whether
the signal cables have been connected correctly.
Many laptop computers may need to change the setting for monitor output
when connecting to the projector. Usually a key combination like Fn + F3
or CRT/LCD key turns the external display on / off. Locate a function key
labeled CRT/LCD or a function key with a monitor symbol on the laptop.
Press Fn and the labeled function key simultaneously. Refer to your laptop's
documentation to find out your laptop's key combination.
15