Table of Contents
Advertisement
MENU
Security Menu
Item
PIN LOCK
PROTECTION
MODIFY PIN
Selection
OFF: Turn off PIN lock protection.
ON 1: P IN code is needed only at the first time after AC
OFF
ON 2: PIN code is needed every time while the projector is
ON 1
ON 2
Once the PIN code had been set, the projector cannot be
used unless you enter the correct PIN code.
1. Press " MENU " on the projector or remote control.
2. U se the ► button to select the MODIFY PIN item in the
3. P ress the ► button to change PIN LOCK PROTECTION
4. Please enter the original PIN code.
EXECUTE
5. Please enter a new PIN code. And then enter again to confirm.
NOTE:
(1) To change the PIN lock protection state, you must
(2) Please enter: 0000 for first-time use.
(3) To avoid unnecessary trouble, if you activate the [PIN
Description
power has been switched on.
turned on.
CAUTION:
SECURITY category.
mode.
(a) If the PIN is correct, system will allow you to change
a new PIN code.
(b) If the PIN is incorrect, a " Code Error " message will appear.
enter the PIN code first.
Lock Protection], it is highly recommended that you
write down the PIN code and store it in a safe place.
30
Step:
1. U se the ▲ /▼buttons to
select an item.
2. U se the ◄ / ► buttons
to select an item or
adjust the value.
Advertisement
Table of Contents
