Table of Contents
Advertisement
Troubleshooting
Troubleshooting
Indicator
The power and lamp indicators show the status of the projector. Before requesting repair,
check the projector status using the chart below. If the problem cannot be resolved,
contact your dealer.
In normal status~~~
POWER
Blinking In
Green
Lighting In
Green
Lighting In
Green
In abnormal status~~~
POWER
Blinking In
Green
Blinking In
Green
Blinking
Green
In
(Fast)
Blinking In
Green
(Slow)
LAMP
Off
Stand by mode
Off
On mode
Red
Blinking In
Cool down mode
( Slow )
LAMP
Red
Blinking In
Fan fault mode
( Fast )
Lighting In
Red
Lamp cover open
Blinking In
Red
High temperature
( Fast )
Blinking In
Red
Lamp fail
(Slow)
CONDITIONS
CONDITIONS
51
DESCRIPTION
Projector is ready to be turned on.
Projector is on and operating.
Projector is in cool down mode
and will not respond to user input.
DESCRIPTION
The projector has detected a
problem of a slow internal fan
speed. The lamp will shut off
automatically. Contact your
dealer.
The lamp cover is open or there
is a problem with the lamp. If the
lamp door is closed and replacing
the lamp does not correct the
issue, contact your dealer.
The projector has overheated and
shut itself down.
Correct the over temperature
condition immediately.
1. Check that the ventilation slots
are free from obstructions.
2. Check the cleanliness of the air
filter.
The lamp does not light. Come
back to " stand by mode ", and
press the power button.
Advertisement
Table of Contents
