Eiki LC-XDP3500 Owner's Manual page 52

Maintenance of Projector
WARNING
The projector uses a high-pressure mercury lamp.
The explosion of lamp with a loud bang or burn out could possibly cause
injury or a fire.
When the bulb bursts, it is possible for shards of glass to fly into the lamp
housing; and for gas containing mercury to escape from the projector's
vent holes.
If the lamp has broken, do not check the inside of the projector. Please
ventilate the room immediately.
Do not touch or bring your face close to the broken pieces since it might
get into your eyes or mouth. In case of injury, seek medical advice
immediately.
Disposal of a Lamp
Dispose of a lamp in accordance with the local recycling laws.
Do not put it to your trash.
Recycling Lamp's laws of the USA, go to www.lamprecycle.org.
Recycling Product's laws of USA, go to www.eiae.org.
Recycling Product's laws of Canada, go to www.epsc.ca.
For more information about recycling laws, please contact local
government agency or dealer.
CAUTION HOT
Before replacing the Lamp unit, pay attention to the following items:
1.The Lamp is optional part. Contact the dealer for replacement lamp.
2. The lamp becomes very hot when in use. Turn the power off and
disconnect the power cord.
3.Wait for 1 Hour before replacing the lamp.
4. Do not use old lamp unit.
49