Eiki LC-XDP3500 Owner's Manual page 45

Registering And Configuring The Projector
System Setting
Monitor
Item
Lamp Timer
Air Filter Alert
System Status/
Tempeture Level
Input Source
Default Setting
Item
Lamp Timer Alert (Hr.)
Air Filter Alert (Hr.)
Auto Scan Timer
(minutes)
Auto Scan Timer
Projector Number (Sets) Timer Interval (Minutes)
1~25
26~50
51~100
101~255
Read lamp use time from projector.
Read Air Filter Timer from projector.
Read System Status and Temperature from projector in Power On
status.
Read Input Source from projector in Power ON status.
Default Setting Includes 1000/1500/2000 Hours.
When Lamp Timer reaches alert target, window will show lamp
timer in red color to remind user to replace the lamp.
Default setting includes 300/500/800/1000/1500 Hours. When Filter
Timer reaches alert target, window will show filter timer in red color
to remind user to replace the filter.
Auto Detect setting. Default setting includes 1/3/5/10 minutes; user
can set the optimal default listed in Table 6.
1/3/5/10
3/5/10
5/10
10>
42
Description
Description
* The maximum quantity of
projector monitored is 255.
< Table 4 >
< Table 2 >
< Table 3 >