Setting The Mcu To Track Satellites - TracVision M9 User Manual

Setting the MCU to Track Satellites

You can change which satellites your TracVision M9 system tracks by
choosing from preset satellite groups, or selecting up to three satellites
of your choice from the satellite library.
Option A - Choosing Preset Satellite Groups
If desired, you can set the TracVision M9 to track one of the following
preset groups.
TIP: Refer to
list of satellites in the satellite library.
Table 3-1 Preset Satellite Groups
TracVision M9
Version
Circular
Linear
*NOTE: Manual switching is required. You can also purchase a TracVision
Master Receiver Selector (KVH Part #72-0412) if you wish to enable
automatic switching.
Table 3-2 on page 21 and
Preset Group Name
DIRECTV (Dual-sat)
DIRECTV (Tri-sat)
(not used)
DISH 1000/61
(DISH Network)
DISH 1000/129*
(DISH Network)
DISH 500 (DISH
Network)
Bell TV
Europe WB
Europe
Scandinavia
TracVision M9 User's Guide
Chapter 3 - Settings
Table 3-3 on page 23 for a complete
Included Satellites
(Common Names)
DIRECTV 101, 119
DIRECTV 101, 110, 119
ECHOSTAR 11, 7, 3
ECHOSTAR 11, 7, 2
ECHOSTAR 11, 7
NIMIQ 2, 1
HOTBIRD WB,
ASTRA 1, ASTRA 2S
HOTBIRD, ASTRA 1,
ASTRA 2S
HOTBIRD WB,
SIRIUS 4, THOR
19