Changing The Sidelobe Mode Setting - TracVision M9 User Manual

TracVision M9 User's Guide
Appendix A - Advanced Settings and Functions

Changing the Sidelobe Mode Setting

48
When the Sidelobe Mode is set to on, the antenna takes additional time
to validate the satellite signal. Only change the Sidelobe Mode setting
if directed by KVH Technical Support. Use the flowchart in
if you need to change the Sidelobe Mode setting.
TIP: The default Sidelobe Mode setting is off.
Figure A-3 Changing the Sidelobe Mode Setting
Tracking Satellite A
Sat B Menu Sat C
Install Satellite?
Yes Next Return
Operations Mode?
Yes Next Return
Get Antenna Status?
Yes Next Return
Control Antenna?
Yes Next Return
Man Control Antenna?
Yes Next Return
Set Sidelobe On/Off?
Yes Next Return
Sidelobe Mode:
On Return Off
Select "Next" until "Operations
Mode?" is displayed.
Select "Next" until "Set
Sidelobe On/Off?" is displayed.
Select "On" or "Off." Then
select "Enter."
Figure A-3