TracVision M9 User Manual page 11

TracVision M9 User's Guide
Chapter 1 - Introduction
System Features
Your TracVision M9 system uses integrated DVB technology to
®
quickly acquire and track the correct satellite, switch between
satellites, and send TV signals to the receiver. The system includes a
GPS sensor, ensuring that the system acquires your selected satellite in
the shortest time possible.
In-motion Tracking
The TracVision M9 system uses a state-of-the-art actively stabilized
antenna system. Once the satellite is acquired, the system's internal
gyros continuously measure the heading, pitch, and roll of your vessel
and send commands to the antenna motors, keeping the antenna
pointed at the satellite at all times - even while you're on the move!
Tri-satellite Tracking Capability
Your TracVision M9 is capable of tracking up to three of your selected
satellites, as long as the antenna is located within the selected
satellites' coverage area. During installation, your TracVision system
should have been set up to track your desired satellites, allowing you
to switch between your selected satellites quickly and easily.
Automatic Skew Adjustment (Linear Version Only)
When you change location or switch satellites, the TracVision M9
automatically adjusts the LNB skew for the selected satellite.
Satellite Library
The TracVision M9 includes a library of over 70 of the most popular
satellite services in the world! If desired, you can also add up to two
more satellites of your choice to the satellite library.
TIP: For complete information on the satellite library, see "Setting the MCU
to Track Satellites" on page 19.
7