Advanced Settings And Functions; Manually Controlling The Antenna - TracVision M9 User Manual

Manually Controlling the Antenna

Use the flowchart in
manually.
NOTE: If you are performing this procedure as part of the satellite frequency
scan update procedure, be sure to select "NO" at the "Make Antenna Track"
screen.
TIP: Once you have finished positioning the antenna, the system will revert
to automatic control.
Figure A-1 Manually Controlling the Antenna
Tracking Satellite A
Sat B
Install Satellite?
Yes
Operations Mode?
Yes
Get Antenna Status?
Yes
Control Antenna?
Yes
Man Control Antenna?
Yes
Az = 999.9°
–
Az = 999.9°
–
Make Antenna Track?
Yes
Figure A-1 if you wish to control the antenna
Menu Sat C
Next Return
Select "Next" until "Operations
Mode?" is displayed.
Next Return
Next Return
Next Return
Next Return
Select "–" or "+" to change the
El = 999.9° azimuth value relative to the
vessel's bow (not a magnetic
Azimuth +
reference). Then select "Azimuth."
Select "–" or "+" to change the
El = 999.9°
elevation value. Then select
Elevation +
"Elevation."
Select "Yes" if you wish to make
the antenna track. Note: If you
No Cancel
are performing this procedure
as part of a satellite frequency
scan, select "No."
TracVision M9 User's Guide
Appendix A - Advanced Settings and Functions
45