Connection; Connecting To Terrestrial Antenna; Connecting To Tv & Vcr - Strong SRT 5005 User Manual

6.0 Connection

6.1 Connecting to Terrestrial Antenna

To receive the broadcast signal, the terrestrial antenna cable should be connected to the ANT IN
connector at the back of the receiver. (FIGURE 1)
6.2 Connecting to TV & VCR
The TV set should be connected with the receiver through a SCART cable. This terrestrial receiver may
also be operated together with a VCR using the loop through function. The loop-through function of
this terrestrial receiver is active when the receiver is powered off. As soon as the VCR is turned on,
its video and audio signals are looped through the terrestrial receiver. (FIGURE 2)
6
FIGURE 1
FIGURE 2
PART 1 English