Safety Precautions; Storage; Equipment Set-Up - Strong SRT 5005 User Manual

PART 1 English

3.0 Safety Precautions

To maintain your receiver's optimum performance, you are advised to apply the following
safety precautions:
Read this manual carefully and make sure you fully understand the instructions given.
Refer all maintenance or servicing to suitably qualified personnel.
If you wish, you may clean your receiver with a soft lint-free cloth slightly made damp with a
mild soap solution, only after disconnecting from the mains voltage supply.
Do not use alcohol or ammonia based liquids to clean the receiver.
Do not open the receiver cover, as you will be exposed to a shock hazard.
Do not open the receiver cover this will void your warranty.
Do not place any objects on top of the receiver because this might prevent proper cooling
of the components inside.
Make sure no foreign objects fall through the ventilation slots because this could
cause fire or an electric shock.
Wait a few seconds after switching off the receiver before you move the receiver or
disconnect any equipment.
Please ensure that that the electrical power supply corresponds with the voltage on the
electrical identification plate at the back of the receiver.
It is a necessity that you only use an approved extension and compatible wiring that
is suitable for the electrical power consumption of the installed equipment.
If the receiver does not operate normally even after strictly following the instructions
in this user manual, it is recommended to consult your dealer.

4.0 Storage

Your receiver and its accessories are stored and delivered in a packaging, protective against electric
damage and moisture. When unpacking it, make sure that all the parts are included and keep
packaging away from children. When transporting the receiver from one place to another or if you are
returning it under warranty make sure you repack the receiver in its original packaging with its
accessories. Failing to comply with such packaging procedures could void your warranty.

5.0 Equipment Set-up

We recommend you to consult a professional installer to set up your equipment.
Otherwise, please follow the following these instructions carefully:
Refer to the user manual of your TV and your antenna.
Make sure that the SCART cable is in a good condition.
Make sure that the SCART cable connections are well shielded.
Make sure that the outdoor components of the antenna are in good condition.
5