Table of Contents
Advertisement
Familiarizing the Buttons in WebViewer
7.1
Right-clicking on the WebViewer video screen, enables you to start video recording, change video quality,
switch camera and enable/disable DirectDraw.
Name
(1) DirectDraw
Not all graphic cards can support this function. If you cannot see the screen display correctly or screen
i
is messed, please check with VGA card vendor.
(2) Received file size
(3) Camera frames
(4) One screen view
(5) Split screen view
(6) Audio
(7) Record
(8) Remote Console
(9) Event Log Viewer
(10) Remote setup
(11) PTZ Control
(12) Snapshot
(13) Full screen
Function
Enhance the video quality.
Indicate the size of the data being sent per second.
Indicate the number of frames per second.
To view single camera view on screen. User can right click on the screen to switch to
different camera view.
To view all cameras on screen simultaneously.
Enable/disable remote sound.
Start to record the video of the selected camera in AVI format. Directly click screen to
select the channel that user wants to record and press Record button.
Initiate Remote Console. It allows you to control DVR server (see also Chapter 7.3).
Display the Event logs, Operation logs, System logs, and Network logs.
Change the DVR server settings (see also
Initiate PTZ camera controller(see also
Capture and save the screen shot in *.bmp format.
Use the entire area of the screen to only display the video.
To return, Right click the mouse or press ESC on the keyboard.
Chapter
7.1.1)
Chapter
7.2)
55
Advertisement
Table of Contents
