Sagem PHONEF@X INTERNET 390-i User Manual page 48

Table of Contents

Advertisement

Your terminal is approved only for use with compatible switchboards including those which do not provide
secondary proceed indication. If you would like a list suitable switchboards, contact BT on 0800 800 152.
If you do have a compatible switchboard it cannot be guaranteed that the apparatus will operate correctly
under all possible conditions of connection.If you have any difficulties, contact BT on 0800 800 152.
Calling the Emergency services
This equipment is not designed for making emergency telephone call (999) when the power fails. Alter-
!
native arrangements should be made for access to emergency services
10. SAFETY WARNING
Interconnection circuits should be such that the equipment contibues to comply with the requirements of 4.2
of EN 41003 for TNV circuits and 2.3 of EN 60950 for SELV circuits, after making connections between
circuits.
Interconnection directly, or by way of the other apparatus, of ports marked « SAFETY WARNING ». SEE
INSTRUCTION FOR USE, with ports marked or not so marked may produce hazardous conditions on the
network. Advice should be obtained from a competent engineer before such a connection is made.
To prevent fire or shock hazard, do not expose this product to rain or any type of moisture emergency
!
services
How to connect the mains lead to a plug
Your apparatus comes complete with fitted plug. If however, it becomes necessary to fit an alternative main
plug, the following instructions must be adhered to.
For apparatus connected by mains plug, the wall socket must be installed near the apparatus and must be
easely accessible.
Note: the wires in the mains lead are coloured in accordance with the following code:
Green-and-yellow: earth connected
Blue:
Brown:
Read the instruction carefully before connecting the mains lead to a plug. If in doubt, consult a qualified
electrician.
As the colours of the wires in the mains lead of the apparatus may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:
• The wire which is coloured blue must be connected to the terminal which is marked with the letter N or
coloured black
• The wire which is coloured brown must be connected to the terminal which is marked with the letter L
or coloured red
• The wire which is coloured green and yellow must be connected to the terminal which is marked with the
letter C or coloured green
neutral
live
41

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents