Sagem PHONEF@X INTERNET 390-i User Manual page 11

RINGING TONE
You can choose between 4 different tones or NO RINGING TONE and adjust the volume of the ringing tone
chosen.
‡
Press MENU, 2, 3 and OK.
‡
Select the desired ringing tone (N° 1 to 4 or NO RINGING TONE) using the
‡
To adjust the volume of the tone, press
‡
When the tone and volume suit you, press the OK key.
TYPE OF NETWORK
The telephone line to which your machine is connected may be linked either to a private network or the public
network (via a switchboard, for example).
‡
To set your fax machine for a PABX (private network), press MENU, 2, 4, 1 and OK.
‡
To set your fax machine for PSTN, press MENU, 2, 4, 2 and OK.
PREFIX
If your unit is connected to a private automatic branch exchange (PABX), you must record the prefix number
(generally 0).
‡
Press MENU, 2, 5 and OK.
‡
Select the WITH option using the
‡
Enter the number used by your PABX to access the telephone network (for instance 0) followed by a / and
press the OK key.
‡
If necessary, enter the phone number length to which the prefix must be automatically added (in most cases
the value is 10) and press the OK key to confirm.
‡
Then press the STOP key.
Note: choosing the prefix enables you to change from a private network (WITH prefix) to a public network
(WITHOUT prefix). In this case, all the number in the directory are memorised without a prefix.
NUMBER OF RINGS
You can set the number of rings after which the answering machine is activated.
‡
To set the number of rings (2 to 9), press MENU, 2, 6 and OK.
‡
Change the number of rings if you wish and press the OK key to confirm your choice (2 to 9).
REMOTE RETRIEVAL CODE
This function allows you to define the code to access locally or remotely messages recorded or faxes received by
your machine and stored in memory.
‡
To enter a remote retrieval code, press MENU, 2, 7 and OK.
‡
Enter your code and press the OK key to confirm your choice.
TRANSMISSION REPORT
After sending a fax, your fax machine can print the transmission report to your choice.
‡
Press MENU, 2, 8 and OK.
‡
Select an option using the
• WITH: A transmission report is printed whether the transmission has ended successfully or has failed.
There is thus one transmission report for each transmission request.
• WITHOUT: There is no report for the documents send (refer to the transmission log to keep a trace of
communications).
• IF ERROR: A transmission report is printed only if the transmission failed.
‡
Press OK to confirm.
4
keys.
+
or keys and press the OK key to confirm.
or keys.
and navigation keys.