Sagem PHONEF@X INTERNET 390-i User Manual page 40

3
2
Remove the worn ink ribbon from its housing.
Position the ink ribbon over its housing under the rear cover
Insert the ink ribbon without removing the adhesive strip (2):
• position the right end of the main roller onto the retractable axis.
• position the left end of the main roller onto the left axis.
4
Pull off the adhesive strip (2) from the ink ribbon .
5
5
6
Insert the small roller in its housing: check that the gear axis (3) is correctly positioned in the slot (4), and that the
other axis (5) is also correctly positioned (6) in the slot.
3
OR
4
OR
2
5
OR
3
4
2
5
6
2
3
4
33