Asus P2B-D User Manual page 97

Maximum SGList— Specifies the maximum number of
scatter-gather elements. Valid values are 17-255. The data type
for this value is REG_DWORD.
To enter Windows NT parameters, follow these steps:
1
Select Run from the File menu (Windows NT 3.5x), or Run
from the Start button (Windows NT 4.0).
2
Type regedt32 and press Enter.
3
Open the registry list to the following location:
\HKEY_LOCAL_MACHINE\System\CurrentControlSet\
Services\aic78xx\Parameters\Device
or
\HKEY_LOCAL_MACHINE\System\CurrentControlSet\
Services\aic78u2\Parameters\Device
If the \Parameters\Device keys already exist, skip to step 8
below to begin entering values. If the keys do not yet exist, you
will need to create them by continuing with step 4.
4
Click on the aic78xx or aic78u2 key.
5
Select Add Key from the Edit menu; Type Parameters in the
Key Name edit box. Leave the Class edit box blank.
6
Click on the Parameters key.
7
Select Add Key from the Edit menu; Type Device in the Key
Name edit box. Leave the Class edit box blank.
To specify a certain host adapter, append Device with the
number of the host adapter. For example, type Device0 for the
first host adapter, Device1 for the second, etc. If you omit the
host adapter number, the configuration information applies to
all 7800 Family host adapters.
8
Click on the Device key.
9
Select Add Value from the Edit menu. In the Value Name edit
box, enter one of the valid parameter values. Make sure to
enter the appropriate Data Type for the value. To enter
additional values, repeat steps 8-9.
Microsoft Windows NT Installation
2-9