Asus P2B-D User Manual page 155

4
Insert the requested volume (7800 Family Manager Set diskette
for SCO UNIX) in the floppy drive and press Enter. Prompts
similar to the following appear until the driver is completely
loaded:
alad.alad:Loading module fd(52)/alad/driver/alad/Driver.o
.text ..........
:
:
alad: Driver "alad" successfully loaded.
5
When prompted to insert the SCO UNIX N2 (Filesystem)
diskette, remove the 7800 Family Manager Set diskette for SCO
UNIX from the floppy drive, and then insert the SCO UNIX N2
(Filesystem) diskette and press Enter.
6
Follow the procedures in your SCO UNIX documentation for
completing the installation until you have reached and
completed the Password procedure.
Note: For SCO UNIX 3.2v4.2 only: When the run-time
installation is complete, make sure you select the
Install Additional Software option. This ensures that
the Link Kit is installed and available for later driver
integration.
7
After completing the Password procedure, a message similar
to the following appears:
The BTLD packages will now be added to the Link Kit.
The following packages are on this disk.
NAME DESCRIPTION
alad Adaptec 7800 Family Driver for SCO UNIX 3.2v4.2/dxx
alad325 Adaptec 7800 Family Driver for SCO OpenServer 5/dxx
blad Adaptec 7800 U2 Family Driver for SCO UNIX 3.2v4.2
blad325 Adaptec 7800 U2 Family Driver for SCO OpenServer 5
Please enter the names of the packages you
wish to install or q to quit:__
[default: alad]
SCO UNIX Installation
6-3