Asus P2B-D User Manual page 185

SCO UnixWare Installation
[xxxxx098] Exceeded maximum number of host bus adapters
The driver has detected more host bus adapters than is supported by
this version of the driver or operating system.
[xxxxx0a4] SCSI bus reset by third party
Hardware such as an array enclosure may have reset the SCSI bus.
This is a normal condition unless you receive additional errors.
[xxxxx0a5] SCSI bus reset by host adapter
The host adapter may have reset the SCSI bus. This is a normal
condition unless you receive additional errors.
[xxxxx0cf] System configuration error
The driver encountered an error with your hardware. Refer to your
host adapter's user's guide for troubleshooting information.
[xxxxx0d0] Command timeout
The target device is either busy, not ready, malfunctioning, or is not
present. Refer to your host adapter's user's guide for
troubleshooting information.
[xxxxx0d7] Target device scan failed
The driver encountered an error scanning the target device. Refer to
your host adapter's user's guide for troubleshooting information.
7-15