Asus P2B-D User Manual page 140

Adaptec 7800 Family Manager
2
Delete some of the existing files on the backup copy of the
OS/2 installation diskette #1 so that approximately 140 KBytes
of disk space is available on the diskette. Use the following
information to help you decide which files to delete:
– If the Adaptec 7800 Family host adapter is the only Adaptec
host adapter installed in your system, delete all Adaptec
drivers ( aha152x.add , aha154x.add , aha164x.add ,
aha174x.add , aic7770.add , and fd16_700.add ).
– If you have an Adaptec host adapter that is not part of the
7800 Family, delete all of the Adaptec drivers not used by
that particular host adapter. For example, if you have an
Adaptec AHA-1540CP host adapter installed in your
computer, delete all Adaptec drivers except for the
aha154x.add driver.
– If you have deleted the suggested Adaptec drivers above,
and if you do not have a Microchannel architecture system,
and you still do not have approximately 120 KBytes of disk
space available on the diskette, delete these files:
ibm2flpy.add , ibm2adsk.add , and ibm2scsi.add .
Note:
If you have a combination PCI/Microchannel
architecture system, you need to delete third-party
driver files not required.
3
Copy the aic7870.add or aic78u2.add driver from the 7800
Family Manager Set diskette for OS/2 onto the OS/2
installation diskette #1. This overwrites any existing version of
the driver included on diskette #1.
Note:
The aic7870.add driver resides in the
\os2\aic7870 directory and the aic78u2.add driver
resides in the \os2\aic78u2 directory.
5-4