Asus P2B-D User Manual page 114

Adaptec 7800 Family Manager
7
You must restart your computer for the changes to take effect.
What if a yellow exclamation mark or a red X appears in Device Manager in front of my
host adapter.
This means there is some kind of resource problem. First, see if the
names of any host adapters appear that are not actually installed in
your computer. If so, select the name and click Remove.
If a red X appears in front of your host adapter name, remove all the
host adapter references under SCSI Controllers and run Add New
Hardware, as described in the previous question/answer.
If a yellow exclamation point appears in front of your host adapter
name, the resources that the driver uses probably do not match the
resources used by the hardware. Double-click the host adapter
name, then click on the Resource tab. Deselect the Use Automatic
Settings box and edit the resources (Interrupt Request, Direct
Memory Access, etc.) so they match those used by the host adapter.
If the problem still remains, there is probably a hardware resource
conflict between the host adapter and other hardware in your
computer. You can fix this by changing the hardware resource
settings. (See your hardware documentation.)
What do I need to do if I change or upgrade my host adapter?
1
Open the Control Panel, double-click on System, and click the
Device Manager tab.
2
Double-click the SCSI Controllers icon, select the name of the
old host adapter, and click Remove.
3
Turn the computer and physically remove the currently
OFF
installed host adapter.
4
Install the new host adapter according to the instructions in the
hardware documentation.
5
Turn the computer
and Play, Windows will install and configure it automatically.
Otherwise, run Add New Hardware to make sure the new
driver is loaded.
3-6
. If the new host adapter supports Plug
ON