Asus P2B-D User Manual page 102

Adaptec 7800 Family Manager
Removing a Host Adapter in Windows NT 4.0
1
From the Control Panel, double-click the SCSI Adapters icon.
2
Click the Drivers tab.
3
Select the driver you are planning to remove. The driver
appears as one of the following:
For Ultra SCSI:
Adaptec AHA-294X/AHA-394x/AHA-4944 or AIC-78xx PCI
SCSI Controller (NT 4.0)
or
Adaptec AHA-294x/AHA-394x or AIC-78xx PCI SCSI
Controller (NT 4.0)
or
Adaptec AHA-294x/AHA-394x or AIC-78xx PCI SCSI
Controller
For Ultra2 SCSI
Adaptec AHA-294Xu2/AIC-7890\91 PCI Ultra2 SCSI Controller
(NT 4.0)
4
Click the Remove button.
5
If you are sure you are removing the correct host adapter type,
click Yes.
6
Click Yes to restart the computer and initialize changes. Click
No to return to the SCSI Adapters window.
Note:
Windows NT Setup does not delete the device driver
from your system disk; it only updates Windows NT
software configuration information so that the device driver
is no longer loaded during system bootup.
2-14