Asus P2B-D User Manual page 115

If I am running under Windows 95, do I need lines for the Adaptec real mode ASPI
drivers and mscdex in my config.sys and autoexec.bat files?
Usually, you do not need to use these Real mode ASPI drivers, because
the new Windows miniport drivers support most SCSI host adapters
and SCSI devices. However, you need to load the drivers (including
mscdex , if you have a CD-ROM drive) if any of the following is true:
You are running in MS-DOS mode and need to access your
CD-ROM drive.
You are using a scanner or another SCSI device with config.sys -
or autoexec.bat -based drivers, such as Hewlett Packard
sjiix.sys.
You have an older model SCSI-1 CD-ROM drive that
Windows 95 does not support.
You are using a CD-Recorder drive (however, some newer
models of CD-Recorder drives can use the embedded
Windows miniport drivers).
My CD-ROM drive doesn't work properly under Windows 95.
Some older models of SCSI CD-ROM drives are not compatible with
the embedded Windows 95 CD-ROM driver. You can add support
for the CD-ROM drive by doing the following:
1
Make sure your ASPI Real mode drivers (including aspicd.sys,
aspi8dos.sys, and mscdex.exe ) are loaded and running from
your config.sys and autoexec.bat files. Refer to the EZ-SCSI
User's Guide for more information.
2
If step 1 did not work, find the file named cdtsd.vxd in the
\windows\system\iosubsys directory and rename it cdtsd.sav .
Microsoft Windows 95 Installation
3-7