Table of Contents
Advertisement
A A E O N P a n e l P C
Setup
NOTE: To clear the password, simply press Enter when asked to
enter a password. Then the password function is disabled.
3.13 Save & Exit Setup
If you select this option and press <Enter>, the values entered in the
setup utilities will be recorded in the chipset' s CMOS memory. The
microprocessor will check this every time you turn on your system
and compare this to what it finds as it checks the system. This record
is required for the system to operate.
3.14 Exit without saving
Selecting this option and pressing <Enter> allows you to exit the
Setup program without recording any new value or changing old one.
3.15 Limitations
1.
Due to Intel chipset limitation, when CMOS was set up to "LCD
+ CRT", the LCD display will not support full-screen appearance.
2.
Because of USB chipset limitation, front USB port and Card reader
USB interface are linked together, when user "disable" front USB
port ¡] USB Port 3 controller¡^, the card reader must be forced to
disable at same time.
3.
When the system stays in Clear CMOS, LCD will appear nothing;
it's due to Intel chipset bug. Please connect one CRT with the
system, and load (CRT+LCD) Defaults again.
For more detailed information, you can refer to the "AAEON BIOS
Item Description.pdf" file in the CD for the meaning of each setting
in this chapter.
APC-8122 Series User Manual V1.0
Enter a password whenever you enter Setup.
A P C - 8 1 2 2
52
Advertisement
Table of Contents
