A A E O N P a n e l P C
APC-8122.
3.9 PC Health Status
This sample screen contains the manufacturer' s default values for the
APC-8122.
3.10 Frequency/Voltage control
This sample screen contains the manufacturer' s default values for the
APC-8122.
3.11 Load (CRT+LCD) Defaults or Load (LCD) Defaults
When you press <Enter> on this item you get a confirmation dialog
box with a message similar to:
Load (CRT+LCD) Defaults? or
Load (LCD) Defaults?
Pressing one item loads the CRT+LCD default or LCD default
setting, which allows the VGA displaying events on CRT and LCD
simultaneously or on LCD only.
3.12 Set Supervisor/User Password
You can set either SUPERVISOR or USER PASSWORD, or both of
them. The difference between the two is that the supervisor password
allows unrestricted access to enter and change the options of the
setup menus, while the user password only allows entry to the
program, but not modify options.
To abort the process at any time, press Esc.
In the Security Option item in the BIOS Features Setup screen, select
System or Setup:
System Enter a password each time the system boots and when-
APC-8122 Series User Manual V1.0
ever you enter Setup.
A P C - 8 1 2 2
51