Table of Contents
Advertisement
R o b u s t P a n e l P C
System
Setup
NOTE: To clear the password, simply press Enter when asked to
enter a password. Then the password function is disabled.
3.13 Save & Exit Setup
If you select this option and press <Enter>, the values
entered in the setup utilities will be recorded in the chipset's
CMOS memory. The microprocessor will check this every
time you turn on your system and compare this to what it
finds as it checks the system. This record is required for the
system to operate.
3.14 Exit without saving
Selecting this option and pressing <Enter> allows you to exit
the Setup program without recording any new value or
changing old one.
3.15 Limitations
1. Due to Intel chipset limitation, when CMOS was set up to
"LCD + CRT", the LCD display will not support full-screen
appearance.
2. Because of USB chipset limitation, front USB port and Card
reader USB interface are linked together, when user
"disable" front USB port （USB Port 3 controller）, the card
reader must be forced to disable at same time.
For more detailed information, you can refer to the "AAEON
BIOS Item Description.pdf" file in the CD for the meaning of
each setting in this chapter.
Enter a password each time the system boots
and when ever you enter Setup.
Enter a password whenever you enter Setup.
A P C - 8 1 2 2
Chapter 3 BIOS Installation 3-7
Advertisement
Table of Contents
