Table of Contents
Advertisement
A A E O N P a n e l P C
Windows 2000 CD ROM and key in its path. Then click on
the OK button to key in path.
3.
Click on the Finish button to finish installation process. And
allow the system to reboot.
4.
The LCD signal may be turned off automatically after the VGA
driver is installed, please press "Ctrl+Alt+F3" to enable LCD
signal again.
4.2 LAN Driver Installation
We strongly recommend that you shall not install LAN driver by
clicking on Autorun Exe. Please follow the steps in order to finish the
process of installation.
1.
Click on Start button ¡÷ Settings ¡÷ Control Panel ¡÷ System
2.
Select Device Manager under the Hardware category.
3.
Double click on the Ethernet controller and select update
Driver button under the Driver category.
4.
Click Next twice and tick the Specify a location option.
5.
Click Next and choose a route where you want place the folders
on before you click on open.
6.
Click Next ¡÷ Yes ¡÷ Finish and the window will show you
how to finish the installation process.
APC-8122 Series User Manual V1.0
A P C - 8 1 2 2
56
Advertisement
Table of Contents
