Assembly - Pro-Form GR 80 User Manual

ASSEMBLY

Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tools, assembly requires a Phillips screwdriver
adjustable wrenches
Use the drawings below to identify the small parts used for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following
the key number is the quantity needed for assembly. Note: Some small parts may have been preassembled.
If a part is not in the hardware kit, check to see if it has been preassembled. If a part is missing, call
1-888-533-1333.
M6 Washer
(55)–8
M4 x 16mm
Round Head
Screw (52)–4
M8 x 25mm Button
Screw (33)–3
.
M8 Split
Washer (59)–5
M6 x 38mm Button
Screw (48)–4
M10 x 75mm Carriage Bolt (51)–4
5
M8 Nylon
Locknut (60)–4
M6 x 42mm Button
M8 x 70mm Button
Bolt (54)–2
and two
M10 Nylon
Locknut (63)–4
Screw (49)–4