Safety Instructions - Husqvarna Huskylock 90 Operating Manual Instructions

Table of Contents

Advertisement

Important Safety Instructions
When using the sewing machine, basic safety precautions should always be followed,
including the following:
Read all instructions before using this household sewing machine
DANGER -
To reduce the risk of electric shock:
• The sewing machine should never be left unattended when plugged in. Always unplug
the sewing machine from the electrical outlet immediately after using and before
cleaning.
WARNING
- To reduce the risk of burns, fire, electric shock, or injury to persons.
• Do not allow to be used as a toy. Close attention is necessary when used by or near
children.
• Use only as described in this manual. Use only manufacturer's recommended
attachments.
• Do not use with damaged cord or plug. If sewing machine is not working properly, has
been dropped or damaged, left outdoors, or dropped in water, return it to the nearest
authorized dealer or service center for examination, repair, electrical or mechanical
adjustment.
• Never operate the sewing machine with any air openings blocked. Keep ventilation
openings of sewing machine and foot controller free from the accumulation of lint,
dust, and loose cloth.
• Never drop or insert any objects into any opening.
• Do not use outdoors or on wet surfaces.
• Do not operate where aerosol (spray) products are being used or where oxygen is
being administered.
• To disconnect, turn the main switch off , then remove plug from outlet.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Keep fingers away from all moving parts. Special care is required around the sewing
machine needles.
• Always use the proper needle plate. The wrong plate can cause the needle to break.
• Do not use bent needles.
• Do not pull or push the fabric while stitching. It may deflect the needle causing to
break.
• Switch the sewing machine off when making any adjustments in the needle area, such
as threading needle, changing needle, threading bobbin, or changing presser foot, and
the like.
• Always unplug the sewing machine from electrical outlet when removing covers, or
when making other user servicing adjustments mentioned in the instruction manual.
• Keep your work area well lighted.
• Always unplug before relamping. Replace bulb with same type rated 15 W.
This sewing machine is intended for household use
2
SAVE THESE INSTRUCTIONS
Huskylock 90

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Viking huskylock 90

Table of Contents