Table of Contents
Advertisement
DMX Operation
This is the operating mode which will allow for control with an external DMX controller. You must set the
starting address for this mode. If this is your first time using DMX, then it is recommended that you refer to
the "DMX Primer" section in the "Appendix" of this manual.
1.
Press <MENU> until
2.
Press <ENTER>.
3.
Using <UP> and <DOWN>, select the desired DMX address (
4.
Press <ENTER>.
Menu Map (Service)
This fixture has a hidden menu. The purpose of this menu is to adjust the home position (electronic
adjustment) of the attributes listed below.
M
F
AIN
UNCTION
Please see the instructions below to access this hidden menu:
1.
Press <MENU> for at least 10 seconds.
Using <UP/DOWN>, enter the following pass code: "2323". Press <UP> to change the blinking
2.
digit in ascending order, and press <DOWN> to move on to the next digit.
3.
Press <ENTER>.
This mode will be automatically terminated after 10 seconds of being idol.
These settings are set to 128 by default. The
affect these settings.
4. Operating Instructions
appears on the LED screen.
S
ELECTION
I
NSTRUCTION
~
Adjustment for Pan #1
~
Adjustment for Tilt
~
Adjustment for Pan #2
~
Adjustment for the Color Wheel
~
Adjustment for the Gobo Wheel
13
~
).
option in the control panel will not
10/9/2009 2:29 PM
Advertisement
Table of Contents
