Menu Map; Dmx Operation; Master/Slave - Chauvet LED PAR 38 TRI-B User Manual

MENU DOWN
The Control Panel shows the current state of the unit. It is used to select the operating mode, as well
as the sub-features. For a detailed layout of the control panel functions, please see the "menu map"
section on the following page.

Menu Map

M F S -F
AIN UNCTION UB UNCTION
P1
P2
P3
P--
P4
P5
P6
3-CH d001 d512
~
7-CH d001 d512
~
C1
C2
C3
C-- C4
C5
C6
C7
S-- S001 S100
~
r---
U-- g---
B---

DMX Operation

This is the operating mode which will allow for control with an external DMX controller. You must set the starting
address for this mode. If this is your first time using DMX, then it is recommended that you refer to the "DMX
Primer" section in the "Appendix" of this manual.
1. Press <MENU> until
2. Press <ENTER>.
3. Using <UP> and <DOWN>, select the desired DMX address (

Master/Slave

This is the operating mode which will allow 1 fixture to act as the "master" and control all of the other "slave"
fixtures. You must set both the master and the slave(s) fixtures to the correct mode for this operation.
Master Settings:
1. Connect the fixtures with DMX cables, as shown in the "Fixture Linking" section.
2. Use any one of the standalone modes for the master unit. This includes:
Slave Settings:
1. Press <MENU> until
LED PAR 38-Tri B&C User Manual
UP ENTER
S
ELECTION
7 Color Switching
7 Color fading
3 Color Switching
3 Color Fading
Use the Audio Adjustment
7 Color sound active
Knob located on the back
3 Color sound active
of the fixture
-
-
Red
Green
Blue
Cyan
Magenta
Yellow
White
S050
(default range is )
Red
Green
Blue
3-CH 7-CH
or appears on the LED screen.
3-CH 7-CH
or appears on the LED screen.
S -S
UB ELECTION
Select between 2 switching and 2 fading
-
built-in programs
Select between 2 sound active programs
- Select 3-channel DMX mode (RGB control)
Select 7-channel DMX mode: RGB, macros,
-
run speed, strobe, automatic/sound, dimmer
Select between 7 static colors. The display
- will read
these represent are indicated to the left.
This is the speed range for the 4 switching
-
and fading built-in programs
Combine red, green, and blue to create a
000 100
~
custom, static, color
d001 d512
~
P--
10
I
NSTRUCTION
C1 C7
~ . The colors that each of
).
C-- U--
, , and
Rev. 2