Rx System Messages - ADDER AdderLink Infinity dual User Manual

RX AIM Manager

RX System Messages

Enable AIM Control
Click this button to allow an A.I.M. (Adder Infinity Manager) box to take control of this RX. When the button is
clicked, the RX unit will be rebooted to allow the A.I.M. box to discover and control it.
Enable system messages
Tick to allow the creation of status and error messages by the unit.
Send system messages to remote Log Server
Choose this option to send the system messages to a remote server via the network. Provide the IP address of
a suitable server here also.
Store system messages in unit
When ticked, this option will store system messages within the memory of the unit. Click the View messages
button to view the list or the Clear messages button to delete the list.
Update Now
Click to save and implement any changes that you make.
To get here
1 Connect your computer to the Management port
2 Run a web browser and enter the IP address of the Management port: http://192.168.1.42
If the address is unknown, perform a manual factory
3 Click either the AIM Manager or System Messages links, as appropriate.
on the left side of the front panel.
reset.
36