Step Two: Connecting To Your Telephone; Installation Continued - Inter-Tel Headset Telephone User Manual

INSTALLATION continued...

3) Press the Mute button to confirm
if batteries are properly installed.
Indicator will light if unit
is powered.
Note: You may also use an AC power supply
in place of batteries. An optional 3V DC
power supply can be connected to the external
power supply jack.
Step Two: Connecting to Your
Telephone and Headset
1) Unplug your telephone handset cord
from the telephone base and plug it into
the handset jack of ampipher.
2) Connect the supplied telephone curly
cord between the handset jack of
your telephone and telephone jack of
the amplifier.
3) Plug one complete headset to the head-
set jack of the amplifier located on the
front side of the amplifier.
-- 6 --