Info; Quick Menus; Messages - Sim2 SUPERLUMISEC User Manual

Auto settings at any time, provided that you do not exit Memory menu by pressing
Esc.

Info

Displays a summary of the projector settings
This function is displayed by pressing Info on the remote control.

Quick Menus

The quick menus provide access to the main adjustments that affect image quality
without opening the main menu. The adjustments Brightness, Contrast, Color, Tint,
Sharpness, Filter and Noise Reduction will appear on after the other in the lower part
of the screen by pressing ▴ or ▾.

Messages

The following messages may appear on your screen:
•
No signal. The projector does not recognize any signal applied to the selected
input. In this case:
◦ make sure the selected input is connected to a video or graphic signal and
◦ check the condition of the cables used to connect the system to the
◦ make sure the video or graphic signals supplied by the source are
•
Out of range. This message appears when either the resolution or the
vertical/horizontal frequency of the input signal exceeds system specifications
(for example a QXGA graphic signal).
4 Operation
that this source is functioning correctly.
various sources.
compatible with the system technical specifications and, in particular, with
those of the selected input.
SUPERLUMIS 36
User Guide