Upgrading The Firmware - GE 30 User Manual

Code Value
SmtDayNum
SmtRecDay ON/OFF
SmtRecNig ON/OFF
SmtRecWkd ON/OFF
AudioRec ON/OFF
Circular ON/OFF
EventPart
IPcamChgNum New number of IP
Export channel of data
Export_JPG channel of JPG
GUI
Playback Entry
Playback CH XX
S:XXXXXX XXXXXX
E:XXXXXX XXXXXX
--MENU-- Menu text
--OPTION-- Option text
--ITEM-- Item text/Value
ExtRecOn [1]
ExtRecOff [1]
[1] This code is only for testing.

Upgrading the firmware

To upgrade the firmware using the built-in interface:
1. Display the System screen.
2. Click Upgrade to display the Upgrade screen as shown in the figure below.
TruVision DVR 30 User Manual
Description
Change ezRecord day number
Change ezRecord day schedule
Change ezRecord night schedule
Change ezRecord weekend schedule
Change audio record setting
Change circular setting
Change event partition (no more available)
Change in number of IP Cam(for hybrid)
Export Record data of channel
Export JPEG Pic of channel
Start Playback
Change Pb channel
Playback start time information
Playback stop time information
Log what menu user entry
Log what option user select
Log what item value user change
Used for testing inbound RS485 communication.
Temporarily converts specified channel through
special RS485 command. The value stands for which
camera will be converted. (start from 0)
Used for testing inbound RS485 communication. Un-
converts the camera to be converted through
ExtRecOn
Chapter 7: System settings
73