Adjusting Brightness; Adjusting The Temperature - Eizo ColorEdge CS230 User Manual

●

Adjusting Brightness

The screen brightness is adjusted by changing the brightness of the backlight (light source from the LCD back
panel).
Setting Range
50 cd/m 2 to 300 cd/m
Procedure
1. Press or .
The Brightness menu appears.
2. Use or for adjustment.
3. Press to exit.
Attention
• If the entered value cannot be set, the value will appear in magenta. In such a case, change the value.
Note
• Alternatively, you can use "Brightness" under "Color" in the Adjustment menu to adjust it.
• The values shown in "cd/m
●

Adjusting the temperature

The color temperature can be adjusted.
The color temperature is normally used to express the hue of "White" and/or "Black" by a numerical value.
The value is expressed in degrees "K" (Kelvin).
The screen becomes reddish at a low color temperature, and bluish at a high color temperature, like the flame
temperature. The gain preset values are set for each color temperature setting value.
Setting Range
Native, 4000K-10000K (specified every 100K), Standard
Procedure
1. Choose "Color" from the Adjustment menu, and press
2. Choose "Temperature" from "Color", and press
3. Use or for adjustment.
4. Press to exit.
Note
• "Gain" allows you to perform more advanced adjustment (see
• If you set "Native", the image is displayed in the preset color of the monitor (Gain: 100% for each RGB).
• When gain is changed, the color temperature is changed to "User".
• The default setting for each Adobe
conformity with each standard.
2
2
" are available only as reference.
®
RGB(CX240 only)/sRGB mode is set to "Standard", which is the temperature in
.
.
"Adjusting Gain" (page 23)).
Chapter2AdjustingScreens
19