Hdmi (Sd Signal) Input; Configuring Moving Image Performance - Eizo ColorEdge CS230 User Manual

●

HDMI (SD signal) input

Settings
Auto
4:3
LetterBox
16:9
Example: 480i/480p (16:9)
CS230
CX240
Procedure
1. Choose "Screen" from the Adjustment menu, and press
2. Choose "Screen Size" from "Screen", and press
3. Select "Auto", "4:3", "Letter Box", or "16:9" with
4. Press to exit.
Attention
• For CX240, an image cannot be displayed using the entire screen when the HDMI signal is input.

2-7. Configuring Moving Image Performance

This function reduces visible afterimages that appear in fast moving images. If noise or afterimage is adversely
noticeable, set the "Overdrive" setting to "Off".
Default setting: On
Procedure
1. Choose "Screen" from the Adjustment menu, and press
2. Choose "Overdrive" from "Screen", and press
3. Select "On" or "Off" with
4. Press to exit.
30
Chapter2AdjustingScreens
Themonitorautomaticallychangesthescreensizeaccordingtotheaspectratiosentfrom
theautoinputsignal.
Displaysimagesina4:3formatscreen.Blackbarsappearonbothsidesofthescreen.
16:9imagesarehorizontallycompressed.
Displays16:9letterboxedimagesinfullscreen.
Imagesotherthantheletterboxedonesarepartlycutontopandbottom.
Displaystheentire16:9imageinfullscreen.Blackbarsappearonthetopandbottomof
thescreen.
4:3imagesarehorizontallyexpanded.
Auto
or .
Function
LetterBox
4:3
.
.
or .
.
.
16:9