Enabling/Disabling Automatic Brightness Adjustment; Checking The Power Saving Level; Adjusting The Brightness Of Indicator - Eizo ColorEdge CS230 User Manual

5-2. Enabling/Disabling Automatic Brightness
Adjustment
The ambient light sensor on the front side of the monitor detects the environmental brightness to adjust the screen
brightness automatically and comfortably by using the Auto EcoView function.
Attention
• Be careful not to block the ambient light sensor on the lower side of the monitor when using the Auto EcoView function.
• Auto EcoView cannot be used when ColorNavigator and/or ColorNavigator Elements is used.
Procedure
1. Choose "PowerManager" from the Adjustment menu, and press
2. Choose "Auto EcoView" from "PowerManager", and press
3. Select "On" or "Off" with
4. Press to exit.
Note
• For this reason, as "Brightness" in the Adjustment menu is changed, the auto adjustment range is also changed.

5-3. Checking the Power Saving Level

The EcoView menu allows you to check Power Reduction, CO
indicators light up representing the Eco Performance Level, the higher the power saving level attained.
Procedure
1. Choose "PowerManager" from the Adjustment menu, and press
2. Choose "EcoView Index" from "PowerManager", and press
The "EcoView Index" appears.

5-4. Adjusting the Brightness of Indicator

The brightness of the power indicator (blue) can be adjusted. (Default setting: 4)
Procedure
1. Choose "PowerManager" from the Adjustment menu, and press
2. Choose "Indicator" from "PowerManager", and press
3. Select the indicator brightness "Off" or in the range from 1 to 7 with
4. Press to exit.
or .
.
.
Reduction, and Eco Performance Level. The more
2
.
.
.
.
or as desired.
Chapter5PowerSavingFunctions
39