Setting Usb Power Save; Setting Displayport Power Save - Eizo ColorEdge CS230 User Manual
Calibration color lcd monitors
Hide thumbs
Also See for ColorEdge CS230:
- Setup manual (2 pages) ,
- Setup manual (2 pages) ,
- User manual (74 pages)
Table of Contents
Advertisement
5-5. Setting USB Power Save
This function allows you to disable the USB connection according to the power saving mode of the monitor.
Attention
• When both the USB upstream port and the USB downstream port are connected to USB devices, the USB connection is not
disabled even when "USB Power Save" is set to "On".
Procedure
1. Press
to turn off the monitor.
2. Holding
The "Optional Settings" menu appears.
3. Choose "USB Power Save" from "Optional Settings", and press
4. Select "On" or "Off" with
5. Select "Finish" with
6. Press
.
5-6. Setting DisplayPort Power Save
This function allows you to change the power setting of the DisplayPort of the monitor.
Attention
• When the setting is "On", the screen may not display normally. In such a case, turn the setting to "Off".
Procedure
1. Press
to turn off the monitor.
2. Holding
The "Optional Settings" menu appears.
3. Choose "DP Power Save" from "Optional Settings", and press
4. Select "On" or "Off" with
5. Select "Finish" with
6. Press
.
40
Chapter5PowerSavingFunctions
down, press
for at least two seconds to turn on the monitor.
or , and press
or .
down, press
for at least two seconds to turn on the monitor.
or , and press
or .
.
.
.
.
Advertisement
Table of Contents
