Page 1
User’s Manual Color Management LCD Monitor Important Please read this “User’s Manual”, and “PRECAUTIONS” (separate volume) carefully to familiarize yourself with safe and effective usage. • Refer to the “Setup Guide” for information on the installation / connection of the monitor. •...
Page 2
EIZO Corporation is under no obligation to hold any submitted material or information confidential unless prior arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every effort has been made to ensure that this manual provides up-to-date information, please note that EIZO monitor specifications are subject to change without notice.
When the screen becomes dark or begins to flicker, please contact your local EIZO representative. Do not press on the LCD panel or edge of the frame strongly, as this may result in display malfunctions, such as interference patterns, etc.
Cleaning The stains on the cabinet and LCD panel surface can be removed by moistening part of a soft cloth with water. Attention • Chemicals such as alcohol and antiseptic solution may cause gloss variation, tarnishing, and fading of the cabinet or LCD panel, and also quality deterioration of the image.
Contents Notice for this monitor ......... 3 Chapter 5 Administrator Settings ....32 Cleaning ..............4 5-1. Basic Operation of the "Administrator Settings" Menu ..........32 To use the monitor comfortably ......4 5-2. "Administrator Settings" Menu Contents ..............5 Functions .............
Chapter 1 Introduction This chapter describes the features of the monitor and the name of each control. 1-1. Features ● User-defined custom key function • Work efficiency can be improved by assigning frequently used functions to the switches on the front of the monitor. The functions that can be assigned to custom keys are the following: - Brightness - Prev.
1-2. Controls and Functions ● Front 1. Operation switches Displays menus. Operate the switches according to the operation guide. Touch the switch to display its menu. The switch indicators are lit white when you turn on the power. 2. Power switch Turns the power on or off.
● Rear 3. Transportation handle This handle is used for transportation. Attention • Firmly grasp and hold the monitor by the bottom while grabbing the handle, and carefully convey the monitor so as not to drop it. 4. Lock button Use this button when removing the stand from the monitor.
1-3. Supported Resolutions The monitor supports the following resolutions. ● Vertical Scan Resolution Scan Dual Link Single Link Frequency 640 x 480 59.940 Hz √ √ 640 x 480 60.000 Hz √ √ 720 x 400 70.087 Hz √ √ 800 x 600 60.317 Hz √...
● USB Type-C Vertical Normal, YCbCr YCbCr Resolution Scan Scan Extra 4:4:4 4:2:2 4:4:4 Frequency 640 x 480 59.940 Hz √ 10 / 8 bit 10 / 8 bit 10 / 8 bit 640 x 480 60.000 Hz √ 10 / 8 bit 10 / 8 bit 10 / 8 bit 720 x 400...
1-4. Changing the PC Display Settings If the screen is not properly displayed after connecting the monitor to a PC, follow the procedure below to change the PC display settings. ● Windows 10 1. Right-click anywhere on the desktop except for on icons to display the menu. 2.
● macOS 1. Select "System Preferences" from the Apple menu. 2. When the "System Preferences" panel is displayed, click "Displays". 3. If there are multiple monitors including the notebook PC screen connected to the computer, open the "Arrangement" tab and confirm that "Mirror displays" is not selected. If it is selected, clear it. 4.
Chapter 2 Basic Adjustments/Settings This chapter describes the basic functions that can be set by touching the switches on the front of the monitor. For advanced adjustment and setting procedures using the Setting menu, see “Chapter 4 Advanced Adjustments/Settings” (page 21).
● Operation Guide Icons Icon Description Switches the input signal. Switches the color mode. Executes the function assigned to Custom Key 1. Executes the function assigned to Custom Key 2. Displays the Setting menu. Returns to the previous screen. Moves the cursor. Executes the selected operation.
● Display Modes Color Mode Purpose Standard Mode Adjust color using the monitor's Setting menu. You can also adjust the monitor’s display using color management software "ColorNavigator 7". User Select for configuring color settings according to your preference. ® ® Adobe Suitable for color matching with Adobe RGB compatible peripherals.
Chapter 3 Custom Key Settings You can assign functions to the custom keys to easily start specified functions. This chapter describes how to operate the custom keys and how to assign functions to the custom keys. 3-1. Basic Operation of the Custom Keys Displaying the operation guide 1.
Page 19
2. Use to select "Preferences", and then select The Preferences menu appears. 3. Use to select "Custom Key", and then select The Custom Key menu appears. 4. Use to select the custom key to which you want to assign a function, and then select The menu for assigning a function appears.
● Functions that can be Assigned to Custom Keys Function Description Disables the custom key even when it is touched. Brightness Set the brightness. For more information, see page Prev. Color Mode You can return to the previous color mode. This is convenient for checking the differences between two color modes.
Chapter 4 Advanced Adjustments/Settings This chapter describes the advanced monitor adjustment and setting procedures using the Setting menu. For the basic setting functions using the switches on the front of the monitor, see "Chapter 2 Basic Adjustments/Settings" (page 15). 4-1. Basic Operation of the Setting Menu Menu display 1.
Page 22
Adjusting/setting 1. Choose a menu to adjust/set with , and then select The Sub menu appears. 2. Choose an item to adjust/set with , and then press The Adjustment/Setting menu appears. 3. Adjust/set the selected item with , and then select The Sub menu appears.
4-2. Setting Menu Functions ● Signal The signal settings are used to configure advanced settings for input signals, such as the screen display size and color format. Function Settings Description Input Color Format Auto The color space of the input signal can be specified. Try changing this setting if colors are not displayed correctly.
Page 24
Function Settings Description YUV Color Matrix Auto Select the YUV format of the input signal. Use this setting for BT.601 gradation collapse or other occurrences where the screen BT.709 is displayed incorrectly because of a problem with the input BT.2020 signal.
● Color ® When the screen is displayed in Standard Mode (User / Adobe RGB / sRGB), you can adjust the color settings of each color mode according to your preference. Attention • The same image may be seen in different colors on multiple monitors due to differences between individual monitors.
Page 26
Function Settings Description Gamma 1.6 to 2.7 Adjust the gamma. sRGB The brightness of the monitor varies depending on the input signal, however, the variation rate is not simply proportional to the input signal. The control performed to keep the balance between the input signal and the brightness of the monitor is called "Gamma correction".
Page 27
Function Settings Description Advanced -100 to 100 The hue can be adjusted. Settings Note • Using this function may make some color gradations unavailable for display. Saturation -100 to 100 The saturation can be adjusted. Note • Using this function may make some color gradations unavailable for display.
● Screen Set the screen display size. Function Settings Description Picture Expansion Auto The screen size of the monitor display can be changed. Full Screen • "Auto" Aspect Ratio The monitor automatically changes the screen size Dot by Dot according to the resolution information and aspect ratio information from the input signal (only for HDMI input).
● Preferences The monitor's settings can be configured to suit the usage environment or personal preference. Function Settings Description Menu Rotation 0° This function allows you to change the orientation of the 90° Setting menu to align with the installation orientation. Note •...
Page 30
Function Settings Description Indicator The brightness of the power switch and the operation 1 to 7 switches when the screen is displayed can be set. (Default setting: 4) Beep You can set the beep that sounds each time a switch is operated.
● Languages The display language for menus and messages can be selected. Settings English, German, French, Spanish, Italian, Swedish, Japanese, Simplified Chinese, Traditional Chinese ● Information You can check the monitor information (model name, serial number (S/N), firmware version, usage time) and the input signal information.
Chapter 5 Administrator Settings This chapter describes how to configure monitor operation using the "Administrator Settings" menu. 5-1. Basic Operation of the "Administrator Settings" Menu Menu display 1. Touch to turn off the monitor. 2. While touching the leftmost switch, touch for more than 2 seconds to turn on the monitor.
) on the front of the monitor. On-Screen Logo When this function is set to "Off", the EIZO logo that is displayed when the monitor is turned on does not appear. Information Display When this function is set to “On”, detailed information about the input signal is displayed when the signal or color mode is switched.
Page 34
Function Settings Description DUE Priority Uniformity This product is equipped with a Digital Uniformity Equalizer (DUE) Brightness function that reduces display unevenness. This DUE setting can be changed. • "Uniformity" Prioritizes reduction of display unevenness. • "Brightness" Prioritizes high brightness and high contrast. Note •...
Refer to the User's Manual of the graphics board for details. • This message appears when an external • Check whether the signal cable specified by EIZO is device connected to the USB Type-C connected. connector does not support video signal •...
(page 25)). The LCD monitor backlight has a limited life span. If the screen becomes dark or begins to flicker, contact your local EIZO representative. 2. Afterimages appear • Afterimages are particular to LCD monitors. Avoid displaying the same image for a long time.
• Try changing to a different USB port on the monitor. • Reboot the external device. • If the peripheral devices work correctly when the external device and peripheral devices are connected directly, contact your local EIZO representative. • Check whether the external device and OS are USB compliant.
Chapter 7 Reference 7-1. Removing the Stand The stand section of this product can be removed. Attention • Do not move the removed stand up and down. Doing so may result in injury or equipment damage. • Since the monitor and stand are heavy, dropping them may result in injury or equipment damage. To prevent damaging the panel surface, lay the monitor with its panel surface facing down on a soft cloth spread on a stable surface.
7-2. Attaching the Optional Arm An optional arm (or an optional stand) can be attached by removing the stand section. Please refer to our web site for the corresponding optional arm (or optional stand). www.eizoglobal.com Attention • When attaching an arm or stand, follow the instructions of their User's Manual. •...
7-3. Attaching/Detaching the Cable Holder A cable holder is supplied with this product. Use the cable holder to organize the cables connected to the monitor. Attachment procedure Pass the cables through the cable holder. Close the cable holder. In this state, insert the cable holder into the stand. Note •...
Page 41
Detachment procedure Close the cable holder. In this state, pull the cable holder from the stand. Chapter 7 Reference...
7-4. Connecting Multiple External Devices The product allows you to connect multiple external devices and switch between them for display. Connection examples DD200DL(DVI-D - DVI-D) HDMI HH200HS(HDMI - HDMI) HDMI DisplayPort PP200 (DisplayPort - DisplayPort) DisplayPort USB Type-C CC200SS (USB Type-C - USB Type-C) USB Type-C Note •...
7-5. Making Use of the USB Hub Function This monitor is equipped with a USB hub. It works as a USB hub when connected to a USB-compatible external device, allowing the connection of peripheral USB devices. The USB hub function supports both USB cables (UU200SS) and USB Type-C cables (CC200SS). ●...
7-6. Specifications LCD Panel Type IPS (Anti-Glare) Backlight Wide color gamut LED Size 68.5 cm (27.0 inch) Resolution 2560 dots x 1440 lines Display Size (H x V) 596.7 mm x 335.7 mm Pixel Pitch 0.233 mm x 0.233 mm Pixel Density 109 ppi Display Colors...
Physical Outside Minimum 638 mm x 404.1 mm x 265 mm (W x H x D) Specifications Dimensions Height (Tilt: 0˚) Maximum 638 mm x 570 mm x 269.1 mm (W x H x D) Height (Tilt: 35˚) Outside Dimensions (Without 638 mm x 378.2 mm x 75 mm (W x H x D) Stand) Net Weight...
Apple, macOS, Mac OS, OS X, Macintosh and ColorSync are registered trademarks of Apple Inc. EIZO, the EIZO Logo, ColorEdge, CuratOR, DuraVision, FlexScan, FORIS, RadiCS, RadiForce, RadiNET, Raptor and ScreenManager are registered trademarks of EIZO Corporation in Japan and other countries.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note Use the attached specified cable below or EIZO signal cable with this monitor so as to keep interference within the limits of a Class B digital device. - AC Cord...