Adjusting The Mode; Selecting The Display Mode (Cal Switch Mode); Adjusting Brightness - Eizo Radiforce GX550 Installation Manual

2-3. Adjusting the Mode

●

Selecting the display mode (CAL Switch Mode)

The display mode can be selected according to the monitor application.
Display Modes
Mode
1-DICOM
2-CAL1
3-CAL2
Procedure
1. Touch one of the switches (excluding
2. Select from the guide.
The mode menu appears at the bottom right of the screen.
3. The mode among the list is highlighted in turn each time
You can switch the mode with
Note
• The Adjustment menu and the Mode menu cannot be displayed at the same time.
●

Adjusting Brightness

The screen brightness is adjusted by changing the brightness of the backlight (light source from the
LCD back panel).
Setting Range
0 to 100%
Procedure
1. Select "CAL Switch Mode" of the Adjustment menu, and choose
2. Select "Brightness" from "CAL Switch Mode", and choose
3. Use or for adjustment.
4. Select after completing the setting.
8
Chapter 2 Adjusting Screens
Applies gradation characteristics compliant with DICOM Part 14.
Displays the screen adjusted by calibration software.
Example
1-DICOM
2-CAL1
3-CAL2
or while the mode menu is displayed.
Purpose
).
is pressed.
.
√: Calibration is available.
.
√
√